This adjustable castor wheel assembly is designed for use with scaffold structures where movement and positioning may be required. The castor unit is fitted with a threaded adjustable jack, allowing controlled height adjustment during setup. The adjustable stem enables positioning and levelling of the...

$88.67; Was Price; Sale Price $88.67
Unit price: per

(Ex. GST)

Turboscaffolding

Castor Wheels – 200mm

Castor wheels are fitted to the base of mobile scaffold towers to allow easy movement and positioning on site. They enable scaffold structures to be relocated without dismantling, improving efficiency during installation and maintenance work. The 200mm castor wheel provides smooth mobility while supporting...

$75.82; Was Price; Sale Price $75.82
Unit price: per

(Ex. GST)

Turboscaffolding

CC Coupler

CC couplers are used to connect two scaffold standards together to provide additional strength and stability within scaffold structures. They are commonly used in hoarding applications where standards need to be joined securely to form a continuous structural connection. By linking two standards together,...

From $5.15; Was Price; Sale Price From $5.15
Unit price: per

(Ex. GST)

Turboscaffolding

Clips Joiner Ali Beams

$3.81; Was Price; Sale Price $3.81
Unit price: per

(Ex. GST)

Turboscaffolding

Corner Panels Galvanised 2×2

A 2×2 Galvanised Corner Panel, also known as a cover bracket, is used as a gap filler between hop-up brackets to help create a continuous scaffold working platform. It covers open spaces that can occur when hop-ups are installed around corners or extended work...

$58.34; Was Price; Sale Price $58.34
Unit price: per

(Ex. GST)

Turboscaffolding

Counter Weights – 20kgs

Counter weights are used to balance scaffold structures where uneven loads may occur. They help offset the weight on one side of the scaffold, improving stability and reducing the risk of tipping. Commonly used on mobile and cantilever scaffold setups, counter weights provide additional...

$88.88; Was Price; Sale Price $88.88
Unit price: per

(Ex. GST)

Turboscaffolding

Double Step Down Bracket Galvanised

Double step down brackets are used within scaffold systems to create a lower working platform across two scaffold bays. They allow scaffold decks or planks to step down safely, providing flexibility when working around structures or uneven surfaces. Designed for secure attachment to scaffold...

$31.21; Was Price; Sale Price $31.21
Unit price: per

(Ex. GST)

Turboscaffolding

End Bay for Swing Gates

The End Bay for Swing Gates is used as an extension component to support and complete the installation of scaffold swing gate systems. It helps create a secure barrier at the end of scaffold platforms while allowing controlled access through the swing gate. Designed...

$32.39; Was Price; Sale Price $32.39
Unit price: per

(Ex. GST)

Turboscaffolding

End Toe Board Brackets

End Toe board brackets secure to the outside of a standard to allow for the installation of toe boards.

From $4.97; Was Price; Sale Price From $4.97
Unit price: per

(Ex. GST)

Turboscaffolding

External Joint Pin Sleeve Coupler – 48mm

An External Joint Pin Sleeve Coupler – 48mm is used to join two scaffold tubes end-to-end, creating a continuous tube connection within a scaffold structure. It fits over the outside of the tubes and clamps them together securely, helping maintain alignment and structural integrity....

$7.29; Was Price; Sale Price $7.29
Unit price: per

(Ex. GST)

Turboscaffolding

ForkHead for Props 150W 225L 195H Galvanised

Fork heads are used with adjustable props to support beams, formwork, and structural members during temporary shoring applications. The forked design helps securely hold beams or joists in place while the prop provides vertical support from below. Manufactured from galvanised steel, these fork heads...

$24.23; Was Price; Sale Price $24.23
Unit price: per

(Ex. GST)

Turboscaffolding

Full Putlog Coupler – Butterfly Coupler

A Full Putlog Coupler, also known as a Butterfly Coupler, is used to secure scaffold tubes to structural elements within a scaffold system. It is commonly used where scaffold tubes need to be connected to support surfaces such as walls or other fixed structures...

$8.01; Was Price; Sale Price $8.01
Unit price: per

(Ex. GST)

Turboscaffolding

Ginny Wheels – 200mm

The 200mm Ginny Wheel is used on scaffolding structures to lift small loads and materials to elevated work areas. It is commonly attached to scaffold frames or beams and used with a rope to raise tools, fittings, and lightweight equipment. Designed for construction and...

$85.43; Was Price; Sale Price $85.43
Unit price: per

(Ex. GST)

Turboscaffolding

Girder Beam Coupler Gravelock Coupler – 48mm

A Girder Beam Coupler (Gravelock Coupler – 48mm) is used to attach scaffold tubes securely to structural steel beams or girders. It clamps onto the flange of an I-beam or eye beam, allowing scaffold tubes to be fixed in position without drilling or permanent...

$9.94; Was Price; Sale Price $9.94
Unit price: per

(Ex. GST)

Turboscaffolding

Gravelock Beam Swivel Couplers – Galvanised

A Gravelock Beam Swivel Coupler – Galvanised is used to attach scaffold tubes to structural steel beams while allowing the tube to connect at various angles. The coupler clamps securely onto the flange of a beam or girder and provides a flexible connection point...

$14.15; Was Price; Sale Price $14.15
Unit price: per

(Ex. GST)

Turboscaffolding

Half Coupler Spigot Galvanised

$21.00; Was Price; Sale Price $21.00
Unit price: per

(Ex. GST)

Turboscaffolding

Half Couplers

A half coupler is used to secure a scaffold tube to a fixed surface or structural element within a scaffold setup. One side of the coupler is designed to be permanently fixed, while the other side clamps onto a scaffold tube using a bolt...

From $2.80; Was Price; Sale Price From $2.80
Unit price: per