Why are some scaffolding system painted while others galvanised?

Painted Scaffolding System

There are many reasons why scaffolding painted! The first and the main reason being painted scaffolding reduces rust and oxidisation. No matter what type of scaffolding used for the task at hand, all kinds of scaffolding ought to be structurally sound and secure. Scaffolding does weaken with time due to environmental considerations and general deterioration. When scaffolding painted, it gives a “casing” like finish that prevents the effects of water-on-metal contact, getting rid of the corrosion of the metal underneath. Although at times, scaffolding is personalised to showcase a company’s brand or corporate colours, it’s primarily painted for durability, security and dependability.

Scaffolding systems like Kwikstage and Cup-lock intended painted scaffolding types whereas tube and scaffold fittings galvanised.

Why Is Galvanised Scaffolding Priced Higher?

Though galvanised scaffolding is popular, it’s not common as painted systems, and that’s because of the differences in their costs. The common man would take it for granted that the system not having paint would be a cheaper purchase than the painted system. This assumption is not correct! Because scaffold’s made as fully galvanised systems pass through the added procedure, so they can be fully-galvanised and seal the metal from all corrosion and rust. The whole process of galvanisation is more time-consuming and thus, more expensive for the manufacturer and the customer.

If that’s the case, why take the trouble to buy galvanised scaffolding?

• Galvanised scaffolding systems last longer than painted systems, and also requires less maintenance and repairs.
• Galvanised scaffolding system is worth its asking price.
• Many offshore oil, gas and marine industries choose fully galvanised scaffolding system (Most popularly opting for fully-galvanised Cup-lock).

Galvanised Vs Painted Scaffolding

Galvanised and painted scaffolding systems both have their own merits and drawbacks with different costs and benefits.

• Painted systems most commonly used in the areas and environments that don’t experience harsh environmental conditions.
• When painted systems used, paint does break off and deteriorate through installation, use and dismantling of the scaffolding systems due to their characteristic. When that occurs, the part can become corroded, which gradually results in rust and a faulty part that need reconditioning, re-painting and re-testing for structural strength.
• Compared to painted scaffolding systems, fully galvanised scaffolding systems need far less of maintenance.
• Moreover, galvanised scaffold-systems hold a far higher lifespan. It can install in rough offshore environments without any risk of paint coming off to allow any corrosion and rust.
• The “added cost” paid on the purchase of galvanised scaffolding system is being saved on future maintenance costs.
• In contrast, painted scaffolding system can save for the short-term; however, you end up paying over the long-term for scaffolding maintenance and restoration.

Kwikstage Scaffolding Packages

Kwikstage scaffold is a standard system made to render speedy assembly paired with highly flexible designs and enormous strength for all projects. Turbo Scaffolding provides two packages for painted and galvanised steel scaffold as follows:

• 3 Mtr standing height (5 mtr reach height).
• 4 Mtr standing height (6 mtr reach height).

With fast and handy assembly to no hassle disassembly, Turbo’s steel scaffolding packages made to suit most trades including roofers and painters. If you’re interested to know more — please visit the product page at Kwikstage Scaffolding Packages.

Final Words

Maintain a scaffolding system’s structural stability and enhance its lifespan by giving it a coat of paint or galvanising it entirely with a protective finish regardless of the scaffold system you choose or the finish you select.

• If your budget allows for long-term investment on a completely galvanised scaffold system, you can go for it as it will save you maintenance costs over long-term.
• In contrast, if your budget allows you to spend only on a painted system so that it can save you on the purchase costs for the short-term; bear in mind, it will inherit maintenance costs over the long-term.

Turbo Scaffolding has over 20 years of rock-solid experience in supplying high-quality scaffolding systems in Perth, Sydney Melbourne & Brisbane. We provide robust and durable scaffolding systems and fittings at unbeatable prices. Based out of Sydney, Turbo Scaffolding has vast warehouses in Sydney, Perth, Melbourne and Brisbane.

Kwikstage Scaffolds

Over the decades, Kwikstage scaffold has proved to be the most efficient form of scaffolding. It could be quite hard for the construction workers to manage their work without Kwikstage scaffolds. Kwikstage scaffold is available in different material such as timber, aluminium and steel – it is revolutionary and cost-efficient. Kwikstage scaffold includes tube and fitting method, which is a brilliant alternative to conventional types. On the whole, construction managers are opting for Kwikstage scaffolding, be the construction is for residential or business purposes. Due to its many advantages, Kwikstage scaffolding is being used in construction sites across Australia and rest of the world.

Some of The Major Benefits Of Using Kwikstage Scaffolding Are As Follows:

• Simple To Install And Pull Down: An exceptional aspect of Kwikstage scaffold is that it can be set up (erected) and pulled down smoothly and swiftly.
• Compliant To All Kinds Of Buildings And Constructions: The Kwikstage scaffold is flexible enough that it can be used for all types of buildings and different construction sites.
• Exceptional Quality: Steel scaffolding is designed to be used at great elevated heights because it assures complete safety.
• Enhanced Productivity: Kwikstage scaffolding can support many workers, all at the same time, so it can enhance the overall productivity.
• Permanence: Kwikstage scaffold equipment is made of strong materials that can provide lasting benefits. It has incredible durability and outlasts for many years.
• Lower losses: As Kwikstage scaffolding saves your valuable time, it aids in curtailing losses as well.
• Modest Maintenance Costs: Kwikstage scaffolding requires only modest maintenance, thus, it can keep the overall maintenance costs down.

Scaffolding Must Comply with Industry Standards

It is imperative that scaffolding must comply with the industry standards if it’s used for commercial purposes. Six feet above the ground is the minimum height that is required so that in the case of any accident, the workers aren’t harmed or injured.

Final Words

• It is imperative to get familiar with Kwikstage scaffold systems if you’re managing a construction site – the details mentioned above will assist you in this endeavour.
• If you want to purchase scaffold for sale then get in touch with Turbo Scaffolding, a reputed and established scaffolding company in Sydney that sells a range of scaffold systems, scaffold accessories, scaffold fittings, scaffold parts and tools and more.

Steel Scaffolding

Steel Scaffolding is manufactured in such a way that it can be reused. To make work easy and safe, it also comes with safety lines, decking along with other supplies. In sites wherein the workers need to be working with electricity, there is a provision for insulation so as to reduce the danger of any sort that can occur due to electric shock. Workers should examine all the loose pieces constantly when working with steel scaffolding and they must also check the things that they are wearing. All of the safety gear must be worn at great heights. Workers need to make sure that the raising and the lowering of the platform operate efficiently when working with mobile platforms.

Steel scaffolding has many advantages of which some of them are mentioned below:

• Steel scaffolding provides a steady and firm standing. Steel scaffolding can bear the load and the pressure, be it heavy rain or intense wind. As a matter of fact, steel will be standing as robust as ever even in dire circumstances like that of an earthquake.

• If required, steel has the capacity to withstand a complete lifespan. When compared to other materials, steel scaffolding has a longer durability.

• Steel Scaffold can be easily assembled and dismantled and it increases the work efficiency.

• The leftover steel is the needed raw material that is utilised for scaffolding. Therefore, it helps in solving the problem of waste material and promotes a greener environment. In contrast, if scaffolding is done using wood, we would be soon lacking trees, which are very important for our survival and also beautifies our planet (Earth). Steel does not require cutting and wasting of trees.

It is vital to have reliable and strong foundations. Henceforth, to render operational effectiveness and workers safety, steel scaffolding would be the right choice.

Buy Scaffolding System from a Recognised Company

Always buy steel scaffolding and other scaffold systems from an established scaffolding company. Turbo Scaffolding is Australia’s largest steel scaffolding suppliers who have the solution for your organisation’s precise scaffolding requirements. From Kwikstage modular scaffold and aluminium mobile towers to scaffold stairs & ladders and scaffold fittings & accessories and more, Turbo Scaffolding has a massive range of scaffolding for sale.

What do we understand by the word “Scaffolding”?

Well, scaffolding is just a provisional structure which is used to provide support to the original structure and at the same time, it also functions as a platform for the workers to perform the construction works. According to the type of construction work, the type of scaffolding will differ. Scaffolding ought to be well-built, strong and firm to support workers and other construction material laid on it. Either of steel or timber, scaffolding is made up of.

Here are the 8 top scaffolding types and how they are being used at the construction sites to support the workforce.

1. Trestle Scaffolding
2. Steel Scaffolding
3. Patented Scaffolding
4. Suspended Scaffolding
5. Cantilever Scaffolding
6. Single Scaffolding
7. Double Scaffolding
8. Kwikstage Scaffolding

1. Trestle Scaffolding

The working platform is supported on movable ladders or tripods in trestle scaffolding. It is used up to a height of 5m and is normally used for work inside the room like repairs, paintings and likewise.

2. Steel Scaffolding

Steel scaffolding is made from steel tubes that are set jointly by steel fittings or couplers. It is simple to erect and to dismantle. It has better robustness, greater durability and superior fire resistance. Though it is not affordable cost wise, it provides greater safety for workers. That’s the precise reason it is used so widely these days.

3. Patented Scaffolding

Patented scaffoldings are also made from steel; however, they are fitted with special couplings and frames etc. These are readymade scaffoldings that are obtainable on the market. Working platform is set on the brackets that are adjustable to the required level in this type of scaffolding.

4. Suspended Scaffolding

Suspended scaffolding is mainly used for paintings, repair works, etc. Here, with the assistance of chains or wire ropes etc., the working platform is suspended from roofs. It can be lifted or lowered to the desired level.

5. Cantilever Scaffolding

In cantilever scaffolding, the standards are supported by a chain of needles and these needles are pulled out via holes in the wall. This is known as “single frame” scaffolding-type. In another type, needles are supported inside the floors via the openings and this is called independent or double frame scaffolding type. When constructing cantilever scaffolding, good care should be taken. Normally, under below mentioned conditions, cantilever scaffolding is used.

• When the upper part of the wall is under construction
• When ground is close to the wall and is free from traffic
• When the ground is not capable of supporting standards

6. Single Scaffolding

Single scaffolding is usually used for brick masonry and so it is also known as brick layer’s scaffolding. Single scaffolding comprises of standards, putlogs, ledgers etc., which corresponds to the wall at a distance of around 1.2 m. Distance amongst the standards is around 2 to 2.5 m. Ledgers join the standards at an upright gap of 1.2 to 1.5 m. Putlogs are extracted from the gap remaining in the wall to one end of the ledgers. Putlogs are positioned at a gap of 1.2 to 1.5 m.

7. Double Scaffolding

Double Scaffolding is normally used for stone masonry job, therefore, it is also known as mason’s scaffolding. It is also known as the independent scaffolding. Typically, in stone walls, it is tough to make holes in the wall for supporting putlogs; thus, two scaffolding rows are made to make it robust. Basically, the first row is about 20 to 30 cm away from the wall, and another one is 1m away from the first row. Then after putlogs are positioned that are supported by both the frames. In order to make it sturdier, cross braces and rakers are supplied.

8. Kwikstage Scaffolding

The Kwikstage system is manufactured from hard wearing galvanised steel. Kwikstage scaffolding system is effortless to assemble and erect and simple to take down. For builders working on big or small projects, this scaffolding system is very helpful. Wherever regular scaffold is used, Kwikstage scaffolding can also be used as an alternative. Using a strong and safe interlocking system, the patented Kwikstage modular system can be built to any height.

Choose A Perfect Type of Scaffolding As Per The Requirements:

The above scaffolding types are used for different kinds of work. Choose a scaffolding as per your needs which can provide the complete safety at work place. You can get standard quality scaffolding in Sydney from Turbo Scaffolding. We are one of the most reputed manufactures who provides scaffolding in Perth, Melbourne, Brisbane & Sydney.

Infographic: A Complete Guide To Scaffolding

A scaffold also identified as staging is referred to a temporary configuration, which acts as a support for the people and materials for renovation/construction of buildings. Since ancient times, these structures have been used in many places world over and gained an enormous amount of importance. You’ll find numerous types of scaffolding like wooden structures made from bamboo, modular structures, metal pipes and preassembled structures. Thus, it is imperative to buy or rent the right type of scaffold for your home or office; however, it is more important to get the right type of scaffold for your use.

Let’s go over the different types of scaffolding

These days, there are diverse types of scaffolding available in the market; however, the most widely used scaffold types are listed out here:

Fixed Scaffolds

Fixed scaffolds are the structures fixed at a specific place and are independent or putlog. The independent scaffolds have different types of stands that are present at the front portion of the structure, close to the working platforms. It facilitates the scaffold to stay in an erect position so that adequate amount of support can be provided if bulk work is required for any type of repair/renovation or construction.

Mobile Scaffolds

The freestanding scaffolds that can be easily moved from one place to another are known as mobile scaffolds. It is often fixed on castors or wheels, which assists in its easy movement. When you require a movable structure for the renovation/construction of your office or house, mobile scaffolds are the best option.

Also Read: Essential Facts You Need to Know about Mobile Scaffold

Suspended or Swing Stage Scaffolds

As per the user’s requirements, the platform is either raised or lowered in this type of scaffold. The best example of suspended scaffold is – they are used by high-rise/tall buildings for cleaning their glasses every day. Underneath this scaffold, safety stair system is also placed

Hanging Bracket Scaffolds

Hanging bracket scaffolds are the most common scaffolds having a horizontal type of structure. Typically, the undone surface of construction/renovation or smooth surfaces of building act as a support for these structures. To make sure the right safety equipment is installed inside hanging bracket scaffolds, they are always designed by qualified and expert engineers and this type of scaffolds support load resting.

Ask yourself a few questions before getting scaffolds for your specific requirement

It is imperative to know basic things so that you end up picking the right scaffolds for your construction/renovation job. First and foremost, you should know precisely for what type of tasks you require scaffolds, the budget and how long would you require them. You should know the specific function that requires to be accomplished by the scaffold. Here are a few questions that will give you a clear-cut picture.

• Do you need the scaffolds for a single story building or multi-story building?
• What kind of design does the building possess?
• Does a particular building require the scaffold for construction or renovation?
• What would be the right type of scaffold that will fulfill your requirements?

These questions will definitely assist you in deciding the right scaffold for your requirement.

Turbo Scaffolding is a leading scaffolding supplier based out of Sydney, Perth, Melbourne and Brisbane manufactures and supplies various scaffolds including kwikstage scaffolding, mobile scaffolds, aluminium scaffolding and scaffold accessories and fittings.

Similar Post: Scaffolding Types with Their Uses

1. Know the Standards – It is important to know what the construction rules have to say about the standard measurements. There can be various answers to this as other factors such as boards, tubes and couplers also need to be considered. Look for certifications and specifications that support the equipments load bearing capacity as a whole.

2. Evaluate Traceability and Accessibility – The vertical access requirements is the accessibility that is essential for adding ladders to the scaffolding set-up. The traceability comes into play when a part of the equipment fails to function and can be counted on while purchasing scaffolding Sydney. It has the name of the manufacturer and manufacturing date along with other details that help you learn whether the equipment is still in warranty or not.

3. Do not buy Cheap Varieties – Many scaffolding manufacturers sell substandard quality equipments at cheaper rates. Though one will be able to save a lot of money by purchasing such equipments, he increases the chances of incurring an accident by using low-quality scaffolding ten-fold. Purchasing quality scaffolding may prove to be a little expensive but will cover warranty insurance, technical support and insurance of professional indemnity that will eventually lead to huge savings in the future.

4. Get Technical Support – It is absolutely impossible to determine when a part of the scaffolding might fail to function. When it happens, you will need technical support immediately. You will be able to save money and time and ensure safety. Malfunctioned and non working parts are replaced instead of replacing the entire equipment as the latter, as that will prove to be quite expensive and a time-taking process.

5. Get the Testing done by a Third Party – The third party testing is generally done by the manufacturers who sell the scaffolding. They provide relevant certifications as proof of this testing is complete. Check all the parts visually on purchasing the equipment and have them assembled in front of you. Only then put it to use. A mismatch of parts should be brought to the manufacturer’s attention right away.

6. Make the purchase from local stores – The reason this is recommended, is that it aids in getting access to the technical support team quickly in case anything goes wrong with the equipment. Kwikstage scaffolding for sale is a great option that is available at discounted prices while also assuring quality products and parts. Always opt for nearby suppliers instead of far away ones.

The Kwikstage Scaffold is a modular system of scaffolding that is popularly used in Australia, New Zealand, and the United Kingdom. Kwikstage scaffolding is anadaptable system that maximizes usability and safety in both shore and access applications. It is characterised by its modular design, the stable working platforms and easy to use staircase towers. It ensures multiple size and structure configurations that provide safety from any trouble with the rubble.

Why do you need Kwikstage?

Kwikstage scaffolding can offer the right avenue of support one needs when a building is under construction or repair. One might wonder what the advantage of Kwikstage is over the more orthodox tube and fit scaffolding is. The benefits of Kwikstage scaffolding are several and sundry, vetted by a reputation that has been built over half a century
Simplicity: A monkey could do it.

• The Kwikstage system is easy to erect and dismantle. This not only expedites work, but also allows for the proper enforcement of safety procedures.
• Besides increasing the speed of access to construction through simple structuring, the high load bearing capacity of the Kwikstage scaffold is suitable for multiple trades and heavy industrial projects.

Efficiency, Adaptability, and Safety: No Pain, All Gain!

• The bases of the system are adjustable to the point that they can overcome highly sloping ground and great heights of buildings. This makes the Kwikstage scaffold lucrative in terms of adaptability to its environment.
• There is a marked decrease in damages and an increase in efficiency from traditional scaffolding systems due to the use of captive connectors.
• Kwikstage further accelerates work by eliminating the obstacles posed to normal scaffolding by awkward internal bracing in residential constructions. Projections like porches, sills and balconies can be easily bypassed with this handy model.
• Kwikstage scaffolding ranges boast a large selection of multipurpose accessories like handrails, bays, and board stage brackets. These boost safety and eliminate excessive components from scaffolding structures.

Value for Money: Long Live the Scaffold.

• Kwikstage components are generally made of durable galvanised steel that can be custom-painted.
• The maintenance costs of Kwikstage components are lowered by their longer-than-average life span, due to connections by wedges.

The myriad advantages to the Kwikstage scaffolding system- its endurance, versatility, the security it provides, and its reliability among builders-make it one of the most cost-effective systems available today. So when are you making your castles in the air a reality?