ISO 9001 2008

Kwikstage Modular Scaffold

Home  »  Products  »  Kwikstage Modular Scaffold
Kwikstage Scaffolding is commonly used throughout Australia and New Zealand due to its safety, reliability, flexibility and easy to use modular system. As space around the city centres tightens and the boom in the mining industry continues scaffolding is rising in popularity to get a job at height completed quickly and safely.

Builders working on large and small projects find it the Kwikstage scaffolding system easy to set up and assemble and just as easy to take down again. Leaving them more time to move on to the next job and start a new building project.

Kwikstage scaffolding can be used wherever regular scaffold is used. The patented Kwikstage modular system can be built to any height using a strong and safe interlocking system. There are easy parts and useful accessories such as planks and safety steps to keep you and your workers safe when on site. From government buildings and projects, commercial and business buildings as well as smaller domestic jobs Kwikstage can certainly help any builder on any project to work faster, smarter, more efficiently and above all safely.

The Kwikstage system is made from hard wearing galvanized steel and can also be painted in any colour to suit you or your companies branding. With the high quality material and production you also save money by investing in a system that will last many years and keep its re-sale value. Buy Kwikstage Modular Scaffold at reasonable rates from Turbo Scaffolding, we are located near you.
request a quote
Kwikstage Modular Scaffold
Product Image
Product Details
Code Size Weight Qty
Sole Boards

Soleboards are either hardwood timber planks or LVL timber planks used under Scaffold standards to provide greater load bearing capacity.
If the ground is not level use screw jacks.

Code Size Weight Qty
0.5MSB 0.5 M x 230MM 4.5kg
Adjustable Solid Base Jacks

A 34 x 650mm threaded bar with Cast nut, adjustable to 500mm, designed to fit inside a Standard / Vertical pole to support the load from a standard, and which, in conjunction with a 150mm square x 8.0mm thick base plate, is used for leveling of Scaffold purpose.

Code Size Weight Qty
SJ 34 x 650 MM 7.0kg
Standards

Standard form the vertical supports or uprights. Made from nominal scaffold tube, the standards lock vertically, (Kwikstage) with a captive expanding joint pin, which is tightened by hammering down the captive box wedge. 

Standard come in 6 sizes 3m, 2.5m, 2m, 1.5m, 1m, 0.5m

Code Size Weight Qty
3.0MSTD 3.0M 17.50kg
2.5MSTD 2.5M 14.65kg
2.0MSTD 2.0M 12.10kg
1.5MSTD 1.5M 9.15kg
1.0MSTD 1.0M 6.4kg
0.5MSTD 0.5M 3.5kg
Ledgers

The guard rail ledgers are the lateral horizontal members, and constructed from the same scaffolding tube as the standard.Their approval classifies them as non load bearing. The guard rail ledger comes in many sizes and provide automatic spacing of standards in both access scaffold and form work support applications.

A spigot and captive wedge assembly on each end of the ledger fits snugly into the “V” pressings on the standard, a positive joint is secured by tapping the wedge firm. The captive wedge is easily “cocked” for trouble free erection and dismantle.

Code Size Weight Qty
2.4MLED 2.4M 10kg
1.8MLED 1.8M 7.6kg
1.2MLED 1.2M 5kg
1.0MLED 1.0M 4.35kg
0.8MLED 0.8M 4.0kg
0.7MLED 0.7M 3.85kg
0.5MLED 0.5M 3.2kg
Transoms

Transoms are the transverse horizontal load bearing members of the scaffold. Made from two lengths of 50mm X 50mm angle iron welded back to back forming an inverted “T” section with banana transom ends assemble at each end.

Automatic basing out/transverse spacing is afforded by transoms, which come in four basic lengths of 2.4M, 1.8M, 1.2M and 0.7M which provide 10, 7, 5 and 3 board platforms respectively. A 1.2M return transom is available for flush deck right angle corners where appropriate.

Transoms have been tested at central point loads as per requirements of Australian Standards. The inverted “T” transom provides a captive, flush deck.

Code Size Weight Qty
2.4MTRN 2.4M 21kg
1.8MTRN 1.8M 15kg
1.2MTRN 1.2M 9.8kg
1.0MTRN 1.0M 7.2kg
0.8MTRN 0.8M 6kg
0.7MTRN 0.7M 5.8kg
0.5MTRN 0.5M 4.5kg
Braces

The brace provide an additional stabilising influence on the scaffold. Made from nominal scaffold tube, the brace are flattened at each end, to accept a swivel “c” coupler with a captive wedge. Braces come in various lengths.

Braces fit diagonally across the bays, and will only fit on a level (true) scaffold, once fitted in the base lift they ensure the scaffold stays true and square at all times.

Code Size Weight Qty
3.6MBRC 3.6M 14.7kg
3.2MBRC 3.2M 13.4kg
2.7MBRC 2.7M 11.5kg
2.0MBRC 2.0M 8.6kg
1.7MBRC 1.7M 8.4kg
Steel Boards / Planks

Made From Pre Galvanised steel sheet pressed to a hollow shape 60mm deep x 230mm wide. Steel boards / Planks combine light weight with strength to fit neatly into the inverted “T” seat of transom providing a completely flush working deck with capacity well in excess of the greatest allowable bay loading in 675 kgs.

Steel boards / Planks come in various sizes (3.0M, 2.4M, 1.8M, 1.5M, 1.2M, 1.0M and 0.7M), with limited quantities of other sizes for specialised applications.

Also available in: 1.0MSP, 1.5MSP & 3.0MSP

Code Size Weight Qty
2.4MSP 2.4M 15kg
1.8MSP 1.8M 11.6kg
1.2MSP 1.2M 8.1kg
0.7MSP 0.7M 5.2kg
1 Board Hopups

Stage board brackets provide an additional cantilevered working platform normally from the inside face of the scaffold.

The brackets are manufactured using two angle welded back to back form an inverted “T” section for board location, and are complete with a spigot captive wedge assembly for positive location to a “V” pressing on the standards.

A one board bracket may only be used at deck level on the inside face of the scaffold.

Code Size Weight Qty
1BHB 1 Board 2.4kg
2 Board Hopups

Two and three board brackets have tubular knee bracing to support their cantilever width.

Two and three board brackets are complete with a location hole in the “T” section for insertion of a tie bar. Three board brackets have provision for a hand rail post and with local approval may be used on the end of a run of scaffold.

Special Hopups Brackets are available for specialized applications.

Code Size Weight Qty
2BHB 2 Board 6.5kg
3 Board Hopups

Two and three board brackets have tubular knee bracing to support their cantilever width.

Two and three board brackets are complete with a location hole in the “T” section for insertion of a tie bar. Three board brackets have provision for a hand rail post and with local approval may be used on the end of a run of scaffold.

Special Hopups Brackets are available for specialized applications.

Code Size Weight Qty
3BHB 3 Board 11.4kg
Tie Bars

Tie bars are manufactured from 4mm X 40mm steel angle in three basic lengths to suit the individual bay sizes.

Tie bars are used whenever 2 or 3 board stage brackets are fitted, to eliminate lateral movement and ensure positive location of the boards.

Code Size Weight Qty
2.4MTB 2.4M 7kg
1.8MTB 1.8M 5.2kg
1.2MTB 1.2M 3.5kg
0.7MTB 0.7M 2.5kg
Steel Pallets / Stillages

Code Size Weight Qty
PLT 0.9 m x 0.7m 33kg
Cage Pallets

Code Size Weight Qty
CPLT 0.9 m x 0.7 m 65kg

View and Add or Select more products from related Category

  • Scaffold Specials & Props

  • Scaffold Accessories

  • Scaffold Tubes

  • Scaffold Fittings

  • Aluminium Mobile Towers

  • Scaffold Parts & Tools

  • Scaffold Stairs & Ladders